Henan Zhongsui Engineering Equipment Co., Ltd.

2m3 Mortar Car

Mortar car is used for tunnel, subway and metro as the auxiliary equipment for shield TBM, is the ideal mortar stirring grouting transportation vehicle, consist by the car body、running gear、power system、mixing system、electrical control system and the others.Good seal,easy maintain

Send Inquiry
Product Details

2m3 Mortar car


Introduce:

The 2m³ mortar car is for transporting mortar in tunnel shield construction, mainly for concrete mixer for slurry storage tank,work tract with our battery tunnel locomotive or diesel locomotive, muck car, segment car, flat car, man rider car,etc. mortar truck capacity is 3 ~ 13m3, can design as customer's detail require to supply various mortar mixing car.The mortar car main structure include motar car body, walking part, power system, mixing system, electrical control system.

1. Car body: is welded by 10mm 16Mn steel plate, both end has traction pin connection plate, used for connect with locomotive.

2. Walk device: adopt two axle bearing box bearing walking system,on axle box set two group compound damping spring,imporve the stationary, enlong the axle life time.  

3. Stiring system: the main stir axle use the seamless steel pipe,ensure the axle strength and rigidity,reduce whole vehicle weight. The mixing blade devide into front and back two different direction, good for mortar drain, the seal adopt move, stastic wear-resistant material,seal reliable,hard to wear, less maintainance

Advantage:

1. Compound shock absorption, exhaust braking

2. Steady walking, integrated transportation and agitation 

3. reliable sealing, and continuity of construction

4. include 2m3,3m3,6m3,8m3,10m3

5.shock absorption: rubber spring Wilson Coupling

6. integration of transport and mixing,good sealing,ensure continuity of construction.

Technical data:

Name

Specification

Model

JY-2m³

Outline dimensions

2800×1200×1500mm

Front and rear traction pin center distance

2750mm

 Weight

2000kg

Gaugemm

600,762,900

Wheelbase

1800mm

Wheel diameter

φ220mm

Traction pin center line from the track surface height

320±10mm

The stirring tank

horizontal

The total capacity of

2m³

The stirring motor, deceleration device: specifications, power

Stirring motor: Y132S-4,power:5.5kw

The deceleration device: WPA135-4

Sealed stirring torque kN and stirring shaft

The stirring torque:0.9kN.m

Stirring shaft sealing mode: labyrinth seal oil+ asbestos packing packed seal

The blade material, diameter and rotational speed of stirring

Mixing blade material:16Mn,diameter:1170

Speed:8r/min approximately

Mortar pump type

Centrifugal pump

Flow range

6~8m3/h (0.4MPa、200r/min)

The pressure range of MPa, the pumping distance

Pressure range: ≤ 0.4Mpa

The pumping distance: the flow rate is 23m3/h,head of 12m

Vehicle braking mode

Exhaust brake

Minimum turning radius

25m

Shock absorbing mode

Cylindrical helical compression spring damping mode

mortar vehicles (2).jpg

Related Products
Inquiry