Henan Zhongsui Engineering Equipment Co., Ltd.

10m3 Mortar Car

​The 10m³ mortar car is for transporting mortar in tunnel shield construction, mainly for concrete mixer for slurry storage tank,work tract with our battery tunnel locomotive or diesel locomotive, muck car, segment car, flat car, man rider car,etc. mortar truck capacity is 3 ~ 13m3, can design as customer's detail require to supply various mortar mixing car.The mortar car main structure include motar car body, walking part, power system, mixing system, electrical control system.

Send Inquiry
Product Details

10m3 Mortar Vehicle 

logo2Henan Zhongsui Engineering Technology Co., Ltd

Introduce:

The 10m³ mortar car is for transporting mortar in tunnel shield construction, mainly for concrete mixer for slurry storage tank,work tract with our battery tunnel locomotive or diesel locomotive, muck car, segment car, flat car, man rider car,etc. mortar truck capacity is 3 ~ 13m3, can design as customer's detail require to supply various mortar mixing car.The mortar car main structure include motar car body, walking part, power system, mixing system, electrical control system.

1. Car body: is welded by 10mm 16Mn steel plate, both end has traction pin connection plate, used for connect with locomotive.

2. Walk device: adopt two axle bearing box bearing walking system,on axle box set two group compound damping spring,imporve the stationary, enlong the axle life time.  

3. Stiring system: the main stir axle use the seamless steel pipe,ensure the axle strength and rigidity,reduce whole vehicle weight. The mixing blade devide into front and back two different direction, good for mortar drain, the seal adopt move, stastic wear-resistant material,seal reliable,hard to wear, less maintainance

Advantage:

1. Compound shock absorption, exhaust braking

2. Running reliable, easy maintanance

3. reliable sealing, and ensure the continuity of construction

Parameter :

The name of the project

Parameter

Model

JY10m³

Outline dimensions

4793×1500×2460mm

Front and rear traction pin center distance

4600mm

Weight

6300kg

Gaugemm

900,762,600

Wheelbase

2300mm

Wheel diameter

φ400mm

Traction pin center line from the track surface height

430±10mm

The stirring tank

horizontal

The total capacity of

10m³

The stirring motor, deceleration device: specifications, power

Stirring motor: Y160L-4,power:15kw

The deceleration device: KDH107

Sealed stirring torque kN and stirring shaft

The stirring torque:1.9kN.m

Stirring shaft sealing mode: labyrinth seal oil+ asbestos packing packed seal

The blade material, diameter and rotational speed of stirring

Mixing blade material:16Mn,diameter:1470

Speed:8r/min approximately

Mortar pump type

Centrifugal pump

Flow range

22~25m3/h (0.4MPa、200r/min)

The pressure range of MPa, the pumping distance

Pressure range: less than 0.4Mpa

The pumping distance: the flow rate is 23m3/h,head of 40m

Vehicle braking mode

Exhaust brake

Minimum turning radius

25m

Shock absorbing mode

Cylindrical helical compression spring damping mode

Related Products
Inquiry